Used Metalworking Machinery

Buying-Selling-Brokering-Appraising

2014 Ganesh Cyclone 32CS 7-Axis Turning Center

 

 

Original documentation is available.  Below is a summary of the spec's and what is included with the purchase.  The machine is in plant and under power.  It was used for about 4 years, around 1.5 shifts.  Excellent condition and ready for inspections.

 

Main Spindle:

  • Maximum Speed                                       6,000 RPM
  • Spindle Motor                                            10-HP 3,000 rpm spindle motor, 2:1 pulley ratio
  • Collet Nose                                                Brown & Sharpe #22 or Traub A-32
  • Maximum Barstock Diameter                    1.25”
  • X-axis Travel                                              7.28”
  • Y-axis Travel                                              19.92" (true Y-axis, not compound Y)
  • Z-axis Travel                                              6.50”
  • Rapid Travel Speed                                    X, Y, Z 1,181 IPM (30m /minute)
  • OD Turning Tool Positions                          6 OD Tools (½”) (5-5/8” tool plate available)
  • ID Turning Tool Positions                            5 ID Tools
  • OD Turning Tool size                                   ½”
  • ID Turning Tool Bore Size                           25mm (.984")
  • Spindle Center Height                                40"

 

Sub Spindle:

  • Sub Spindle Speed                                     6,000 RPM
  • Sub Spindle Motor                                      5-HP 3,000 rpm spindle motor, 2:1 pulley ratio
  • Collet Nose                                                 Brown & Sharpe #22 or Traub A-32
  • Maximum Barstock Diameter                    1.375” in collet chuck (1.080” (27.5mm) pass thru)
  • X-axis Travel                                              11.53” (293mm)
  • Z-axis Travel                                              11.61” (295mm)
  • Minimum Input Unit                                     40 millionths (0.00004”) (0.01mm)
  • ID Turning Tool Bore Size                           25mm (.984")

 

Miscellaneous:

  • Machine Dimensions                                  101” x 70” x 80” LxWxH
  • Machine Weight                                          8,000lbs
  • Machine Power                                           220V-3P-60H
  • Machine Air Requirement                           85PSI, 2CFM
  • Coolant Pump Motor                                  3/4HP, Dual for Main and Sub Spindles
  • Coolant Tank Capacity                                80-gallon coolant tank, with coolant flow confirmation sensor

 

Control Features:

  • Ganesh Super 900T Control (Mitsubishi)
    • PC Based, 256MB, 96 Tool Offsets, 15" Color Monitor
    • Tool Life Management, Program Code Check and Alarm Help
    • Over 20 Standard Canned Cycles
    • Advanced Drilling and Tapping Synchronization
    • Cylindrical Interpolation
    • Polar Coordinate Interpolation
    • RS-232, RJ-45 Ethernet, Compact Flash Card Reader

 

Machine Features:

  • Parts Catcher with Parts Conveyor and Catching Basket
  • Belt Type Chip Conveyor
  • Dead Length Collet Chucks for Both Main and Sub Spindles
  • Dual Coolant Pumps with Filtration and Flow Monitors
  • Live Tooling Capabilities with up to 11 Driven Tool Stations, Gear Driven
  • 27 Tool Stations, 18 for Main Spindle, 9 for the Sub Spindle, All 4000rpm Max. Speed
  • Air Blast Nozzle
  • Finished Part Ejector
  • Edge Patriot 12' Automatic Barfeed System
  • 1,000psi High Pressure Coolant System, MP Systems
  • Mist Buster Mist Filtration System
  • Fire Supression System

 

 

Priced at $79,900

 

 

All specifications and features are subject to buyer verification.  Inspections are highly encouraged.

Email us for a full quotation: don@hindleymts.com

Proud Members of the Machinery Dealers National Association and the Association of Machinery and Equipment Appraisers

Contact: Don Hindley

P: 616-916-5990

E: don@hindleymts.com

www.hindleymts.com

Mailing Address:

Hindley Machine Tool Sales, LLC

PO Box 172

Lowell, MI 49331

Warehouse Location:

Hindley Machine Tool Sales, LLC

7976 Clyde Park Ave. SW

Byron Center, MI 49315