New
NEW Clausing Model 4VSQ 10″ x 54″ Knee Mill
Vertical Mills
Clausing Knee Mill 54” Long x 10” wide table, Variable speed sheave pulley control, NMTB40 Spindle taper (CAT40 on request), 5 Hp Spindle motor, AC Power knee elevation. Contact us for a full quotation with all available options.
| Table-W | 10" |
| Table-L | 54" |
| Travel-Long | 41.3" |
| Travel-Cross | 15.4" |
| Power | 5 hp |
| RPM | 4,300 RPM |
| Taper | ISO 40 |
| Dimensions | 78" x 106" x 89" |
| Weight | 3610lbs |
10″ x 54″ Table Size
41.3″ X-Axis Travel
15.4″ Y-Axis Travel
14.0″ Knee Travel
21.9″ Ram Travel
5″ Quill Spindle Travel
5HP Spindle Motor
ISO40 Spindle Taper
60-4300rpm Spindle Speed Range
Low/High Speed Ranges
230/460V-3P Power
3610lb Machine Weight
Manual variable speed with sheave pulley drive
10” x 54” Table surface
Meehanite Castings for superior rigidity and wear resistance
Hardened and Ground X,Y,&Z ways
X/Y ways coated with Turcite B for excellent wear resistance
Column and Knee way covers
Ground T-slots to provide reference edge for workpiece positioning
Hardened and ground table surface, and spindle
Chromed and ground quill
Chromed and double nut leadscrews for backlash compensation
ABEC7/CP4 Spindle bearings
Coolant System w/pump and switch
Articulating head for compound angles 90 degree left and right 45 degree up and down by worm gear
Lever operated manual rapid quill movement
Hand wheel for fine quill feed
Adjustable automatic feed disengagement for quill feed
Micrometer depth stop for quill
Reversing switch for clockwise or counter clockwise operation of spindle
Hand operated spindle brake
One shot way lube system
Contact us for a full quotation with all available options